High Water Reducing Type PCE

Polycarboxylate Superplasticizer PCE 50% (High Water reducing type)

Description of Polycarboxylate Superplasticizer：

PCE is a new generation high performance & environmental friendly polycarboxylate superplasticizer, It can be widely used to prepare the concrete admixtures applied in premix of common concrete, gushing concrete, hydro concrete, high strength concrete, mass concrete and high quality flow plastic concrete etc.

Special Features of polycarboxylate superplasticizer:
1 A kind of high performance liquid admixture, low-chloride, low-alkali, non-toxic, free effect on ecological environment.
2 PCE has excellent water-reducing ability, can greatly reduce slump loss.
3 PCE can significantly reduce 25% ~40% mixing water in concrete.
4 High strength enhancing ability. Better performance when used together mineral admixture.
5 No bleeding, anti-segregation, easy to pump and transport.
6 Good appearance of hardened concrete, without water lines, big bubbles, and color difference.
7 High durability,  polycarboxylate superplasticizer can greatly improve compactness, freeze-thaw resistance, carbonation resistance, elastic modulus and impermeability; reduce drying shrinkage and creep of concrete.
8 A stable performance, non-precipitation.
9 Excellent compatibility with Portland cement.

Storage
It shall be kept from direst sunlight and stored in dry and cool place at the 0-35℃.
Shelf life
Its shelf life is normally six month. It is tested eligibility and then used when it is exceeded. 
Handling
PCE  is free from alkaline.It is no toxic, hazardous, and corrosive. It is inedible. When it contacts to eyes and skin, The affected area shall be immediately rinsed with plenty of water for minutes. Consult physician if irritation persists. Keep container closed when it is not in use. Do not store the product directly under sunlight.