Polycarboxylic acid-based high-performance water-reducing agent (liquid) is the third-generation high-performance water-reducing agent developed after the general water-reducing agent represented by wood calcium and the superplasticizer represented by naphthalene series. The most advanced water-reducing agent with the highest cutting edge, the highest technological content, the best application prospect, and the best overall performance. PCE polycarboxylic high-performance water-reducing agent represents the most technologically advanced superplasticizer in the world today. Comparing with the performance of similar products at home and abroad, PCE polycarboxylate-based high performance water-reducer has reached the international advanced level in terms of technical performance and cost performance.

 

Features:

1. Low dosage and high water reduction rate: The water reduction rate can be as high as 45%, and can be used to formulate high-strength and high-performance concrete.

2. When the slump is light, the loss is small: the slump loss of ready-mixed concrete is less than 15% for 2 hours, which is extremely beneficial for the long-distance transportation and pumping construction of commercial concrete.

3. The workability of concrete is good: Concrete prepared with PC polycarboxylate high-performance water-reducing agent will not show obvious segregation and bleeding even under high slump, and the appearance color of the concrete is uniform. For the preparation of high-flow concrete, self-leveling concrete, self-compacting concrete, clear water facing concrete is extremely beneficial. When used for the preparation of high-grade concrete, the concrete has good workability, good cohesion, and the concrete is easy to stir. .

4. Small concrete shrinkage: It can significantly reduce the shrinkage of concrete and significantly increase the volume stability and durability of concrete.

5, alkali content is very low: alkali content ≤ 0.2%.

6. Good product stability: no precipitation occurs at low temperature.

7. The product is green and environmentally friendly: The product is non-toxic and harmless. It is a green environmental protection product that is conducive to sustainable development.

8. Good economic benefits: The overall construction cost of the project is lower than that of other types of products. .