Article List
- The production process of aliphatic water reducing agentAliphatic superplasticizer is a very widely used concrete admixture, which is beneficial to the preparation of high fluidity concrete, self-leveling concrete, self-compacting concrete and clear faced concrete. Presumably we all want to know, aliphatic water reducer is how to prepare, below, XiaobianProduct & Technology May 23, 2023
- Properties of polycarboxylic acid superplasticizerPolycarboxylic acid superplasticizer is a third generation of high-performance superplasticizer in modern engineering construction, which can improve the quality of construction projects and is a relatively satisfactory building material in engineering construction.It has a high water reduction, canProduct & Technology May 24, 2023
- What are the differences between cutting fluid and cutting oil?Cutting fluid and cutting oil are collectively referred to as metal working fluid. Although they have 4 basic elements, but they are different in some aspects, today Xiaobian for you to sort out and edit the difference between the two to share with you:1, the difference of componentsCutting fluid an
- The main component of metal cutting fluid1, oil additives and extreme pressure additives; Its function is to penetrate and lubricate the metal, reduce the tension of the contact interface between the metal and the cutting fluid, and prevent the damage to the metal workpiece.2, rust prevention additives, mainly to prevent the corrosion ofProduct & Technology March 21, 2023
- What are the differences between cutting fluid and grinding fluid?For the same kind of material, generally speaking, two kinds of finishing fluid can be universal, but grinding production processing than cutting production processing is easier to generate heat, so grinding on the cooling fluid demand is higher, with fully synthetic water-based cutting fluid can re
- Cutting fluid that can improve cutting conditionsCutting fluid, often referred to as coolant or lubricant, can be used to improve cutting conditions and extend tool life. Cutting fluid can be either liquid or gaseous. At the same time, cutting fluid can also be used for coolant and lubrication, such as fat oil. So, why more and more factories bega
- Cutting fluid foam causes and solutionsWhat causes excessive froth in cutting fluid? 1, the liquid level is too low, 2, the working pressure is too high, 3, the water is too soft, 4, the cutting fluid concentration value is too high, 5, gas into, 6, production and processing machinery and equipment design shortcomings, 7, the cutting flu
- What details can help us identify the quality of the cutting fluid?The best way to judge the quality of cutting fluid is through oil analysis (oil detection), but in the absence of instrument detection, what details can help us to understand the quality of cutting fluid?1, pay attention to the production date: the factory date of the cutting fluid should not be too
- What are the advantages of dryer stripping agent?In paper production, mainly toilet paper production, the adhesion between paper and dryer is a big problem in the production, because in the drying process, paper and dryer once too tight, it is difficult to remove all. Therefore, the invention of dryer stripping agent.
- The introduction and characteristic analysis of dryer stripping agentDue to the wider use of non-wood fibers, the increase in papermaking chemicals and the increase in the proportion of secondary fibers used in papermaking, sticky tubes have become a common phenomenon in papermaking. Therefore, it seriously affects the normal operation of paper machine and the qualit