Daily maintenance and discharge of water - based environmental - friendly cutting fluid

cutting fluid (coolant) is a kind of industrial liquid used to cool and lubricate the cutting tool and workpiece

in the process of metal cutting and grinding processing. Cutting fluid is made of a variety of super functional 

additives by scientific combination. At the same time with good cooling performance, lubrication performance, 

rust resistance, oil removal cleaning function, anti-corrosion function, easy dilution characteristics. 

It overcomes the traditional soap emulsion which is easy to smell in summer, difficult to dilute in winter and 

has poor rust prevention effect. It also has no adverse effect on lathe paint. 

It is suitable for cutting and grinding of black metal and belongs to the current grinding products.

Cutting fluid indicators are better than saponified oil, it has good cooling, cleaning, rust prevention and 

other characteristics, and has non-toxic, tasteless, no erosion to the human body, 

no corrosion to equipment, no pollution to the environment and so on.

Through daily maintenance, prolong the service life of water-based environmental cutting fluid, 

protect the performance of water-based cutting fluid. Through reasonable discharge, 

prevent water - based cutting fluid waste liquid pollution.

Water distribution should be in proportion, if too thin will affect the lubrication and rust prevention function.

PH and effective concentration should be checked regularly. Add new cutting fluid when PH and concentration are low.

Metal chips should be cleaned regularly to avoid contaminating the cutting fluid.

A small amount of fungicide should be added when the factory has a long holiday or is shut down (more than five days),

 because the water-based cutting fluid is easy to produce bacteria when it is stationary.

Avoid other pollutants from mixing into the circulating pool to pollute the cutting fluid.

Discharge precautions: Emulsified oil can not be discharged into the ditch or soil, so as not to pollute the environment. 

Full synthetic forming cutting fluid is environmental protection, meet environmental emissions, 

should do a simple chemical treatment in the discharge.