What are the differences between cutting fluid and cutting oil?

Cutting fluid and cutting oil are collectively referred to as metal working fluid. Although they have 4 basic elements, but they are different in some aspects, today Xiaobian for you to sort out and edit the difference between the two to share with you:

1, the difference of components

Cutting fluid and cutting oil are all cooling lubricants for metal working, although they have the same role and function. But there are essential differences in the production and use of material. Cutting oil is mainly composed of base oil and insoluble water additives, such as oil rust inhibitor and lubricant. The main component of cutting fluid is water, and add water-soluble rust inhibitor, lubricant, coupling agent, fungicide, cleaning agent, etc., from the composition of the cutting oil component is simple, the cutting fluid component is complex.

2, the use of performance is different

The main performance is that the cutting oil has good lubrication and rust prevention performance, so the cutting oil is usually used for finishing. Cutting fluid cleaning and cooling performance is good, cutting fluid is mainly used for high speed processing and rough processing need good cooling performance.

3. Maintenance is different during use

Cutting oil according to the specific situation of consumption of new oil can be added. Cutting fluid in the process of use is easy to deteriorate, causing odor. Therefore, in the process of use, pay attention to the concentration value and ph value change at any time and anywhere, and add stock solution and water.

4. The difference between cutting fluid and cutting oil in use cost

Cutting fluid in the process of use need to dilute 10-20 times with water. Cutting oil is used directly, so the cost of using cutting fluid is lower than cutting oil.