What are the differences between cutting fluid and grinding fluid?

For the same kind of material, generally speaking, two kinds of finishing fluid can be universal, 

but grinding production processing than cutting production processing is easier to generate heat, so grinding on the cooling fluid demand is higher, with fully synthetic water-based cutting fluid can reduce the cooling time.

A: cutting fluid is a kind of used in metal materials cutting, cutting, grinding processing process, used for cooling and lubrication tools and workpiece industrial liquid, cutting fluid by all kinds of strong multi-functional additives by scientific combination, at the same time has a good cooling, lubrication, rust resistance, oil cleaning function, anti-corrosion function, easy to dilute and other characteristics.

Cutting fluid can be divided into mineral oil, semi-synthetic and total synthetic.

Mineral oil cutting fluid is usually emulsified, showing a milky milky color; Semi-synthetic cutting fluid presents a microemulsification, a little opaque; The synthetic cutting fluid is a completely transparent water and oil mixture, the color is equivalent to the color of the oil after mixing with water, oil can be made into light yellow can also be made into light green and even light red.

Two: abrasive liquid is generally divided into two categories: oil agent and water agent.

1. Oil lapping liquid includes aviation gasoline, kerosene, transformer oil, various vegetable oils, animal oils and hydrocarbons, with a number of additives; The key is good viscosity, lubrication and rust resistance, cleaning process must be matched with organic solvents, environmental pollution and higher costs.

2. Water grinding liquid by water and a variety of soap mix; Anti-rust treatment ability is water-based, that is, when using water, water concentration in 3%~10%.

3. Grinding fluid is also composed of mineral oil and total synthesis.

General grinding fluid key considering oil capacity and rust prevention processing ability, general grinding fluid and emulsion cutting fluid are universal, but special requirements of precision and high environmental requirements, it is necessary to use the full synthetic grinding fluid.