Water Reducing Agent-Polycarboxylate PCE 70%

Description:

 

PCE 70% is a new generation high performance superplasticizer based on polycarboxylate technology, high water reduction, high slump retention ability, Chlorine Free for the product. It can be widely used in premix of common concrete, gushing concrete, hydro concrete, also suitable for engineering projects under various weathers and primarily for using in hot climate area.

 

Special Features:

 

1. High water reduction:The water reduction rate of concrete is above 22%-25%

2. High slump retention ability. Delay time of transporting concrete and time of detention at construction site.

3. Excellent work ability. High fluidity,easily deposing and compacting.make concrete reducing viscosity,without bleeding and segregation, easily pumping.

4. Wide adaptability. It is compatible with ordinary silicate cement, silicate cement, slag silicate cement and all kinds of blending having excellent dispersibility and plasticity

5. Excellent durability.,. Enhancing concrete strength and durability

6. Environmental friendly products.  Chlorine Free ,No pollution during production.

7.The product with high Solid Content ,It could effective reduce the Product transport and custorm clearance process cost.

 

Uses:

 

1. Widely used in high strength concrete for railway, haven, traffic, bridge and electric power.

2. It is excellent superplasticizer in premix of construction and cast-in-place concrete.

3. It is especially suitable for the preparation of high strength, high durability self-compacting, steel fiber and self-leveling concrete.

 

 

Technical specification:

 

 

 

 

Packaging:
Available in 200kg/ plastic drum or 1000kg/ IBC tank and 23mt flexitank.

Storage:
It shall be kept from direst sunlight and stored in dry and normal condition  

Shelf life:
Its shelf life is normally six month. It is tested eligibility and then used when it is exceeded. 

Handling:
PCE 70%  is free from alkaline .It is no toxic, hazardous, and corrosive. It is inedible. 
When it contacts to eyes and skin, The affected area shall be immediately rinsed with plenty of water for minutes. Consult physician if irritation persists. 
Keep container closed when it is not in use. Do not store the product directly under sunlight. 

Why we chose the PCE 70% as new PCE product.

The PCE 70% be made by our D&R department .The add rate smaller than normal 40%/50% content PCE liquid .Beside ,The PCE 70% liquid is purity PCE liquid without other Chlorine Salt.The product could effective reduce the end user’s purchasing cost and increase building  Project quality .

Now ,We could checking the PCE70% advantage in Product Transport  Cost.