Due to the wider use of non-wood fibers, the increase in papermaking chemicals and the increase in the proportion of secondary fibers used in papermaking, sticky tubes have become a common phenomenon in papermaking. Therefore, it seriously affects the normal operation of paper machine and the qualit

In paper production, mainly toilet paper production, the adhesion between paper and dryer is a big problem in the production, because in the drying process, paper and dryer once too tight, it is difficult to remove all. Therefore, the invention of dryer stripping agent.

The best way to judge the quality of cutting fluid is through oil analysis (oil detection), but in the absence of instrument detection, what details can help us to understand the quality of cutting fluid?1, pay attention to the production date: the factory date of the cutting fluid should not be too

What causes excessive froth in cutting fluid? 1, the liquid level is too low, 2, the working pressure is too high, 3, the water is too soft, 4, the cutting fluid concentration value is too high, 5, gas into, 6, production and processing machinery and equipment design shortcomings, 7, the cutting flu

Cutting fluid, often referred to as coolant or lubricant, can be used to improve cutting conditions and extend tool life. Cutting fluid can be either liquid or gaseous. At the same time, cutting fluid can also be used for coolant and lubrication, such as fat oil. So, why more and more factories bega

For the same kind of material, generally speaking, two kinds of finishing fluid can be universal, but grinding production processing than cutting production processing is easier to generate heat, so grinding on the cooling fluid demand is higher, with fully synthetic water-based cutting fluid can re

1, oil additives and extreme pressure additives; Its function is to penetrate and lubricate the metal, reduce the tension of the contact interface between the metal and the cutting fluid, and prevent the damage to the metal workpiece.2, rust prevention additives, mainly to prevent the corrosion of

Cutting fluid and cutting oil are collectively referred to as metal working fluid. Although they have 4 basic elements, but they are different in some aspects, today Xiaobian for you to sort out and edit the difference between the two to share with you:1, the difference of componentsCutting fluid an

Cutting fluid froth, what should I do?In order to ensure the accuracy and quality of processing, I believe that many technical personnel will look for the cutting fluid foam causes, and strive to solve this problem. Let's take a look at why cutting fluid foams and how to fix it.cause1. The water qua

Is the "burn" produced during grinding due to insufficient cooling?The problems such as "burn" bluing in grinding are caused by local high temperature overheating.The cooling effect of grinding fluid is to transfer the accumulated heat on the grinding wheel and workpiece in time through the heat tra