Fatty alcohol polyoxyethylene ether, levelling agent O, also known as flat plus O, is a non-ionic surfactant, the appearance of milky white or beige paste, high molecular weight, solid (can be made into flake solid according to requirements), easily soluble in water, ethanol, ethylene glycol, etc.,

The types of surfactants used for washing are anionic, non-ionic, and amphoteric, which are generally used in combination with the above types of surfactants.The main ingredient of detergent. Amphiphilic molecules with both lipophilic (hydrophobic) and hydrophilic (oleophobic) parts on the chemical

Polyethylene glycol PEG is a polymer prepared by stepwise addition reaction of ethylene oxide with water or ethylene glycol as raw material. It is a white paraffin-like flake or powder solid, odorless or with weak odor. The structure of PEG is simple, non-toxic, non-irritating, has good water solubi

In mining, metallurgy and coal industry, non-ionic surfactants are widely used in dust removal, mineral processing, coal preparation and coal water slurry production.In coal and ore mining, transportation, crushing processing will produce a lot of dust, harm human health, but also cause environmenta

Surfactants can be divided into non-ionic surfactants, anionic surfactants, cationic surfactants and zwitterionic surfactants according to whether they can dissociate in aqueous solution and the type of charge they carry after dissociation.non-ionic surface active agent A surfactant that does not pr

Polyethylene glycol is a non-ionic water-soluble polymer with a capacitance-enhancing effect, and can be used in the cosmetics industry for oil-free makeup, shampoo, hair conditioner, sunscreen, etc. Polyethylene glycol is a polymer of ethylene oxide hydrolysate, non-toxic, non-irritating, widely us

Foam has always been a problem during metal cleaning, the emergence of foam will bring a lot of adverse effects, in order to effectively deal with the foam problem, the use of metal cleaning defoamer is a good choice!Four bad effects of metal cleaning foam1. Foam will increase the difficulty of meta

1. Causes of surfactant foam formationWhen a surfactant is mixed with water, the hydrophilic end dissolves in the water, and the hydrophobic end detaches from the water and gathers at the surface. In surface surfactants, hydrophobic groups will leave the water surface and enter the air, and hydrophi

Non-ionic surfactants are widely used in the rubber industry, either directly as auxiliaries or as auxiliary agents. For example, in the production of latex products, non-ionic surfactants are used as dispersant, emulsifier, wetting agent, stabilizer, thickener, coagulant, defoamer, etc.dispersantCo

Levelling agent O-25 is also known as cetyl stearyl alcohol polyether, cetyl stearyl alcohol polyoxyethylene ether, C16-18 alcohol polyether, Pinga 0.Its performance and application are as follows:1, in the printing and dyeing industry, it is widely used as a levelling agent for direct dyes, VAT dye