Slag cement has the advantages of low heat of hydration, high strength in the late stage, inhibition of alkali aggregate reaction and sulfate resistance. It has been applied in a large number of projects. In the produce process of slag cement, the slag is not easily grind than the clinker, If grinding two materil together can not reach their optimum active particle size, and separate grinding will cause a lot of energy consumption, so the grinding process used Grinding aids to reduce grinding energy consumption and improve cement performance.

GRINDING AIDS to improve performance and promote cost efficiency of cement manufacture. Used as per permitted by local Cement Standards between 0.01% and 0.30%.Formulated chemical products.Usually in liquid form.Usually added to the mill fresh feed (clinker conveyor belt) or directly inside the mill

1. Super-hydrophilic anti-fog properties: When the film coating the product, the coating is super-hydrophilic (ie, super-surface energy), any temperature water mist (and even steam), fog beads, Membrane contact will immediately infiltrate and spread into a transparent water film; 2. . High anti-drip performance: Due to its super hydrophilicity, the water film moves rapidly and can not aggregate into droplets.

In daily life, people contact with hand washing liquid, washing liquid, shower gel, washing powder, detergent, etc. every day. What they can do is as emulsification, foaming and decontamination. We may do not know the chemical component, it is called Alcohol Ethoxylate (AEO), also named Fatty Alcohol Polyoxyethylene Ether.

The use of spray-applied polyurea coatings for protecting concrete, steel and other industrial substrates from the degrading effects of corrosion and abrasion has increased dramatically. This innovative new polymer coating technology is 100% solids, contains zero volatile content and it is generating an extremely fast gel time which is ideal for moist environments like those in the hydro-electric industry.The SPUA technology theory is reaction of isocyanate with primary amine terminated polyethers(Polyesteramine PEA).

polyurea coating / elastomer is that derived from the reaction product of an isocyanate component and a resin blend component. The isocyanate can be aromatic or aliphatic in nature. It can be monomer, polymer, or any variant reaction of isocyanates, quasi-prepolymer or a prepolymer. The prepolymer, or quasi-prepolymer, can be made of an amine-terminated polymer resin(Polyesteramine PEA), or a hydroxyl-terminated polymer resin.

PEG4000, PEG6000 used as additive in rubber industry, to increase lubricity and plasticity of rubber item, to reduce power consumption in process, increasing rubber item service life.

Calcium nitrate alone acts as a setting accelerator, but has relatively little beneficial effect on the long term period development of mechanical resistances. Regardless of the cement type used, triisopropanolamine used alone performed well as a hardening accelerator at all ages. The combined addition of calcium nitrate and triisopropanolamine produced at very early age significant and promising results with respect to both setting and hardening acceleration.

Shijiazhuang City Horizon Chemical Industry Co., Ltd is working in construction chemicals for more than 20 years, with full experiences and can provide one-stop purchasing service to meet customers' demand on different concrete admixtures raw materials, such as sodium gluconate as concrete water retarder.

Fatty Alcohol have wide application such as in Pharmaceutical Industry, Agriculture industry, Cosemtic Industry, Textile Industry. At present, Haisen Chemical are providing Technical Grade.Welcome to your inquiry!